Cepillos, peines y cardas sin marca de acero inoxidable para perros

This kit will fit the Honda RVF400 NC35 model. 4 Dzus Hex Head Studs. These spacers are also made from stainless steel to prolong the life of this bolt kit. Upper Fairing / Cowl. These are not Honda bolts, they are bolts we have had made from Stainless Steel to replace/upgrade the standard Honda bolts.

This kit will replace all the quarter turn fasteners with GENUINE Dzus Fasteners plus all the threaded bolts that secure the upper and lower main fairings and rear fairings. They are genuine Dzus parts and they do not make them in stainless.

This kit will fit the Honda VFR400 NC21 & NC24 models 1986 to 1988. This kit will replace all the quarter turn fasteners with GENUINE Dzus Fasteners plus all the threaded bolts that secure the upper and lower main fairings and rear fairings.

Material Grade A1 / 303 stainless. Actual contents may vary.

This kit will fit all BMW S1000RR models from 2010 to 2012. Upper Fairing / Cowl. These are not BMW bolts, they are bolts we have had made from Stainless Steel to replace/upgrade the standard BMW bolts.

This O2 Sensor lambda blanking bolt can be used to block off any M12 x 1.25 exhaust pipe or lambda boss. Stainless Steel O2 Oxygen Lambda Sensor Blanking Plug M12 x 1.25mm. This sale is for 1 blanking plug and washer.

2x Fairing Bolts. 2x Nylon Washers.

This kit will fit all Yamaha R125 models 2008-2013. This kit is designed to replace all the visible external fairing & screen bolts with nice shiny stainless steel bolts. These bolts are Stainless Steel which are better than standard zinc plated bolts as they won't rust and have a shine that lasts for years.

This kit will fit the Honda VFR800 models between 1998 and 2001. Upper Fairing / Cowl. These spacers are also made from stainless steel to prolong the life of this bolt kit. These are not Honda bolts, they are bolts we have had made from Stainless Steel to replace/upgrade the standard Honda bolts.

These are used to secure fairings, fenders, taillights and other bodywork parts. They can be fitted to just about any panel (2-3mm thick). 10 x m5 stainless bolts. Just keep turning the screw/bolt through the thread, it will go and then stay nice and tight once fastened.

This kit will fit the Yamaha Diversion / SECA 2 / XJ600S / XJ600SF / XJ600SFC. These spacers are also made from stainless steel to prolong the life of this bolt kit. Upper Fairing / Cowl. These are not Yamaha bolts, they are bolts we have had made from Stainless Steel to replace/upgrade the standard Yamaha bolts.

These O2 Sensor lambda blanking bolts can be used to block off any M12 x 1.25 exhaust pipes or lambda boss. 1 Pair (2) Stainless Steel O2 Oxygen Lambda Sensor Blanking Plugs M12 x 1.25mm. 1 Hexagonal (Allen) Key 6mm for Blanking Plug fitting.

MOTO GUZZI V65 V50 AND MONZA V35 V75 BREVA AND ALL OTHER SMALL BLOCK ENGINED GUZZI. AM A GUZZI OWNER MYSELF. STAINLESS STEEL ALLEN CAP BOLTS AND HEXAGON HEAD BOLTS. 12 PIECES FOR THE OIL SUMP PAN. GEARBOX TO ENGINE.

2012 GSX-R1000L2 FRONT FENDER. 2005 GSX750FK5 FRONT FENDER. 2008 AN400K7 FRONT FENDER (MODEL K7-K8). 2008 AN400AK9 FRONT FENDER (MODEL K9). 2008 AN400AK9 FRONT FENDER (MODEL K7-K8). 2008 AN400 FRONT FENDER.

THE WASHER INCLUDED ARE A FLAT NYLON WASHER, NOTHING SPECIAL BUT WILL PREVENT ANY SCRATCHES TO BODYWORK AND ARE BLACK TO GO UNDETECTED BENEATH THE BOLT. THESE ARE A MATT FINISH.

These are not Ducati bolts, they are bolts we have had made from Stainless Steel to replace/upgrade the standard Ducati bolts. These bolts are Stainless Steel which are better than standard zinc plated bolts as they won't rust and have a shine that lasts for years.

This kit will fit all Yamaha YZF750 models. They best represent the kit but the quantities will be different. No actual fairing panels are included, only fixings! This kit is designed to replace all the visible external fairing & screen bolts with nice shiny stainless steel bolts.

25x M6 Button Head Bolts. They have been made from high quality A2 stainless steel that resists corrosion, is very strong and has a shine that will last!

Once tightened, the rubber nut compresses and holds the screen to the fairing. Freshen up those old screen bolts and rubber well nuts with these. This size screen bolts are used on most Honda models.

These are not Yamaha bolts, they are bolts we have had made from Stainless Steel to replace/upgrade the standard Yamaha bolts. Upper Fairing / Cowl. These bolts are Stainless Steel which are better than standard zinc plated bolts as they won't rust and have a shine that lasts for years.

Cables, Brake Clutch, Air, Throttle, Speedo, Tacho, Magneto, Exhaust Lifter. BSA Goldstar Speedo/Tacho Mounting Plate for Top fork Yoke. In Stainless Steel Finished & ReadyTo Fit. 1 'Mounting Plate'.

Not everybody wants to change these, and to keep the costs down they are not in this kit. This kit is designed to replace all the visible external fairing & screen bolts with nice shiny stainless steel bolts.

FZ750 1985 - 1991. Model not listed?. Suits the following Yamaha motorcycle.

This Suzuki was designed with exhaust bolts. A set of stainless steel studs designed to replace the standard exhaust bolts. Suits the following Suzuki motorcycles GSX-R1100 1986 - 1998. Procedure 2.

This kit will fit most makes and models of bike and these bolts will look very similar to the original fairing bolts used by Yamaha, Kawasaki, Suzuki etc. 10x M5 Button Head Bolts. They have been made from high quality A2 stainless steel that resists corrosion, is very strong and has a shine that will last!

& other bikes fitted with nissin calipers with this type pad pin screw with M10x1.0 thread. Stainless steel brake caliper pad pin screw suitable for.

This kit is designed to replace all the visible external fairing & screen bolts with nice shiny stainless steel bolts. These spacers are also made from stainless steel to prolong the life of this bolt kit.

Countersunk length 1.65mm. Raised head length 0.75mm. 0.5mm thread pitch. Stainless Steel A2-70. Chemical Matt Black finish.

XJ6 (600) Diversion 2009 onwards. Model not listed?. Suits the following Yamaha motorcycle.

This kit will replace all the quarter turn fasteners with GENUINE Dzus Fasteners plus all the threaded bolts that secure the upper and lower main fairings and rear fairings. They are genuine Dzus parts and they do not make them in stainless.

These are notAprilia bolts, they are bolts we have had made from Stainless Steel to replace/upgrade the standard Aprilia bolts. They are not standard bolts (you can't buy these or anything similar anywhere else).

THE WASHER INCLUDED ARE A FLAT NYLON WASHER, NOTHING SPECIAL BUT WILL PREVENT ANY SCRATCHES TO BODYWORK AND ARE BLACK TO GO UNDETECTED BENEATH THE BOLT. THESE ARE A MATT FINISH.

This kit will fit the Yamaha Thunderace YZF1000R 1996-2003. This kit is designed to replace all the visible external fairing & screen bolts with nice shiny stainless steel bolts. These are not Yamaha bolts, they are bolts we have had made from Stainless Steel to replace/upgrade the standard Yamaha bolts.

M15 x 1.25 Stainless Steel Nut 21mm across flats x 6.5mm long Material stainless steel All parts are made in my workshop Many more different sizes available If i haven't got the size you are looking for listed please get in touch This part can also be made in aluminium or mild steel please message me for a price In my workshop i have a manual and CNC lathe and a manual mill / drill machine capable of doing a wide range of work so please get in touch for any parts you may need making over 10 years experience in engineering Any question or inquiries please ebay message or text / call 07858625231 Check out my other items! Be sure to add me to your favourites list!

THE WASHER INCLUDED ARE A FLAT NYLON WASHER, NOTHING SPECIAL BUT WILL PREVENT ANY SCRATCHES TO BODYWORK AND ARE BLACK TO GO UNDETECTED BENEATH THE BOLT. THESE ARE A MATT FINISH.

18mm M18 Weld-in Stainless Steel O2 Oxygen Sensor Port & M18 x 1.5mm Plug. Width Top:28mm. Bottom:22mm M18 Thread. This sale is for 1 Stainless Steel Stepped Edge Weld-in 18mm Thread port and 1 M18x1.5mm blanking plug.

GSX750 1980 - 2006. GSX750F Katana 1989 - 2006. This Suzuki was designed with exhaust bolts. A set of stainless steel studs designed to replace the standard exhaust bolts. Suits the following Suzuki motorcycles.

These are not Ducati bolts, they are bolts we have had made from Stainless Steel to replace/upgrade the standard Ducati bolts. They are not standard bolts (you can't buy these or anything similar anywhere else).

Need to refresh your fairing bolts on yourmotorcycle ?. Original OEM fairing bolts are zinc coated steel that rusts very rapidly. These bolts are made from high quality A2 Stainless Steel that resist corrosion, are very strong and have a shine that will last!

Kawasaki Z650 Z750 GPZ750 Z900 Z1000 Z1100 GPZ1100 Many others. New Stainless Steel Cylinder Head Nuts & Copper Washers. Nuts are machined from 304 stainless steel with a polished finish.

CHAINCASE SLOTTED CAP REMOVAL TOOL. PIC SHOW SLOTTED CAP 57-2166 70-8231 FOR ILLUSTRATION PURPOSES ONLY. IN STAINLESS STEEL. NOTE THE CURVED END TO MIMIC THE CURVE IN THE SLOT.

This kit will fit the Honda VFR800 models between 2002 and 2013. These are not Honda bolts, they are bolts we have had made from Stainless Steel to replace/upgrade the standard Honda bolts. They are not standard bolts (you can't buy these or anything similar anywhere else).

THE WASHER INCLUDED ARE A FLAT NYLON WASHER, NOTHING SPECIAL BUT WILL PREVENT ANY SCRATCHES TO BODYWORK AND ARE BLACK TO GO UNDETECTED BENEATH THE BOLT. THESE ARE A MATT FINISH.

Kawasaki AR125 / KE125 models model Engine Covers Bolts Set In quality A2 Stainless Steel This set offers straight replacement bolts Kit comprises - 18 x Cap Head Bolts in corresponding sizes as per picture Combined postage postage available on multiple purchases Payment by Paypal preferred. Overseas buyers - payment by Paypal only I do not accept responsibility for loss in transit. I always get proof of postage. I will post by Recorded Delivery or Airsure etc. on request. Please note: I make every effort to be as precise as I can, but please do not hesitate to contact me if you require further information or pictures. Please email me using Ebay messages, and I will endeavor to answer any queries. *****.

Suzuki GS850 Shaft Model (for GT see other items) Engine Covers Bolts Set In quality A2 Stainless Steel This set offers straight replacement bolts Kit comprises - 36 x Cap Head Bolts in corresponding sizes as per picture Combined postage postage available on multiple purchases Payment by Paypal preferred. Overseas buyers - payment by Paypal only I do not accept responsibility for loss in transit. I always get proof of postage. I will post by Recorded Delivery or Airsure etc. on request. Please note: I make every effort to be as precise as I can, but please do not hesitate to contact me if you require further information or pictures. Please email me using Ebay messages, and I will endeavor to answer any queries. *****.

Hex Flanged. UNF Hex Head. UNF Full Nut. A4/316 Marine Hex. Coach Bolts. A2-70 Stainless. Torx Security Screw. Black Flanged.

This kit will fit the Yamaha Thundercat YZF600, YZF 600 R. This kit is designed to replace all the visible external fairing & screen bolts with nice shiny stainless steel bolts. These are not Yamaha bolts, they are bolts we have had made from Stainless Steel to replace/upgrade the standard Yamaha bolts.