Tektronix 2232 Oscilloscope

Acerca de este artículo

Product Information

The Tektronix 2232 Digital Storage Plus Analog Oscilloscope is an industry-leading piece of measuring equipment. It can support the display of signal readings in real-time, for increased ease of use. This display technology also allows for the real-time analysis of events by suspending events on its screen. This can be done by evaluating, squeezing, expanding or repositioning the image of the waveform on screen. Interact with these functions easily using the handy buttons at the oscilloscope’s button. You can rely on the Tektronix 2232 Digital Storage Plus Analog Oscilloscope to capture both slow and fast events. The Tektronix 2232 Digital Storage Plus Analog Oscilloscope can detect events at scales of nanoseconds to seconds. This will enable you to capture very slow and very fast events using the same device. It operates at a high bandwidth of 100Mhz and a rise time of 3.5 or 4.4 ns, depending on the temperature value in question. Its measurements are enhanced by a base accuracy rated at plus or minus 2 percent. The Tektronix 2232 has a vertical sensitivity of 2 to 5 V/div, and an 8-bit vertical resolution. Average mode can bring this resolution up to 12 bits. The horizontal resolution is 10 bits or nine per channel in dual-channel mode. Its input impedance is 1 megaohm (20 pF). These specifications, along with its 4K memory depth, should ensure that your Tektronix 2232 will be future-proofed for quite some time. The Tektronix technology also allows you to choose between 1K and 4K recordings. However, it should be noted that 4k recordings are restricted to a third of the length compared to those in 1K. The battery-based guaranteed storage ensures that stored waveforms can be retained for up to three years. You never need to lose a signal reading again. The Tektronix 2232 also offers dual time base capability. It can store analog and digital signals, with a digital sampling rate of 100MS per second. It also has a 10-nanosecond glitch-capture, which functions at all sweep speeds. These are 5 s/div to 0.05 micros/div , with an option to go to 5 nanos/div in 10x magnification mode. This operates in the oscilloscope’s peak-detect mode. It also has accumulated peak detect, sample, and average modes. You can select weights from 1/1 to 1/256 in average mode. Direct signal evaluation and manipulation are easy with this oscilloscope’s pre- and post-triggering, which can be set at any point along a read-out. It has waveform cursors for time and voltage. Communication is also simple and well-supported with GPIB and RS-232C options. The oscilloscope’s GPIB communication is also IEEE-488 compliant. The Tektronix 2232 has a relatively large, 8x10cm CRT display. Its controls include A-Intensity, B-Intensity, Beam Find, Graticule Illumination Focus, Trace Rotation, and Storage/Readout Intensity modes. Its maximum power requirement is 85V, with line voltage of 90 to 250V (AC) and a line frequency of 48 to 440Hz. All in all, the Tektronix 2232 offers accurate, reproducible signal capture with excellent recording and measurement facilities. It’s the only oscilloscope you need to study waveforms within its ranges. With its battery-backed storage, the Tektronix 2232 can give you many years of trouble-free detection of both fast and slow signals.