Acerca de este artículo

Product Information

This PowerFlex Architecture Class Ethernet/IP to DPI communication adapter is suitable for a range of application types. This brand offers state of the art solutions, advanced technology, resources and accessories for personal and company use. The company produces a top quality brand of automation equipment and accessories for quality performance to satisfy your networking needs. Allen-Bradley 20-COMM-E adapter module offers a Multi-Drive feature that allows you to connect PowerFlex 4 drives and DSI hosts to the Ethernet/IP. In Multi-Drive Mode, a single 20-COMM-E can command up to five other drives on a 2 wire DSI protocol network. The adapter offers single or multi drive modes, 10 or 100 Mbps, and full /half duplex operation. The module is designed for use with PowerFlex 70, 700, 700H, 700S, 700L, 750 series and PowerFlex DC. PowerFlex 750 requires a 20-750-20 or 20-750-20-F1 Comm Carrier Card. This model is capable of commanding a PowerFlex drive and provides higher performance for web, email, diagnostics, parameter access and full DPI network bridging for I/O devices. This 20-COMM-E brand has an Ethernet connector that is CAT-5 compliant for reliable data transfer on 100Base-TX Ethernet Connections. Data drive rates are 125 or 500 Kbps. This Ethernet/IP to DPI communication adapter meets several standards. This model is UL listed, CE certified and c-Tick marked. The 20-COMM-E for PowerFlex drives features switches for Operating Mode and Web Pages, so users can select the mode of operation and enable or disable the adapter web pages. The 20-COMM-E Industrial Control System is designed for ease of operating, flexibility and control. The device is equipped with four LED indicators to simplify monitoring the status of the system. There are LED indicators for the Ethernet connection, adapter and DSI. The LED lights blink to indicate a problem with the unit. This model is widely available, so it is simple to search for and order. The UPC number for this adapter is 82091901962. Place this Industrial Control System for PowerFlex drives in your cart and order online for the best prices and delivery to your door. The adapter measures 86 mm in length x 78.5; mm wide, and 19 mm in height. The power supply is 350 MA at 5 VDC. When installing this adapter, there are some general guidelines that should be followed. This model should not be installed in an area where volatile or corrosive gas, dust or vapors are present in the atmosphere. Additionally, it should be stored in an area that is away from these corrosive elements, even when not in use. The adapter comes with two internal interface cables, one that is one inch long and another that measures six inches and one PowerFlex 7 Class Drive Peripheral Interface (DPI) Network Communication Adapter installation guide, which provides a clear description of the installation procedure. You will also need a small flathead screwdriver and Ethernet cable, which are not included with the unit.