Otros recambios de chiptuning y tuning del motor para coches

Vauxhaull Z20LET Manifold Heatshield.

Gewinde: M22x1,5 (passend für alle BMW Differentiale). Das Set beinhaltet eine Ölablassschraube mit Magnet (Unten) und eine Ölablassschraube ohne Magnet (Oben), zusätzlich legen wir zwei neue Kupfer-Dichtringe bei!

AN-6 45 Degree FORGED Teflon PTFE Hose Fitting. Fitting, PTFE Hose End, 45 Degree forged, -6 AN Hose to Female -6 AN, Aluminium, Red/Blue, Each. Only suitable for the AN-6 TEFLON / PTFE Hose. The Teflon reusable hose ends are easier to install than cutter-style fittings and more user-friendly.

Precision CNC Billet Aluminium Cap (Non breather type). Colour : Black. Thread Size : ORB -6. 1 x Aluminium Coolant Tank. Magnetic Drain plug at the bottom for easy draining and cleaning. Capacity : 1000ml ( 1L).

The Teflon reusable hose ends are easier to install than cutter-style fittings and more user-friendly. Automotive / Aerospace-quality Teflon hose end. Fitting Finish: Stealth Black anodized. Only suitable for the AN-6 TEFLON / PTFE Hose.

1/8" NPT Female To M10x1.5 Male Reducer Adapter Black. Thread Size: 1/8" NPT Female to M10x1.5 AN Male. Fitting,Reducer Adapter,, Aluminum, Black, Each. Type: Flare Union Adapter Part Number: TORQ-0001/8"FT10x1.5MUABck.

This rattle is due to wear on the wastegate arm on the turbine housing.

Only suitable for the AN-8 TEFLON / PTFE Hose. Fitting, PTFE Hose End, Straight, -8 AN Hose to Female -8 AN, Aluminum, Red/Blue, Each. The Teflon reusable hose ends are easier to install than cutter-style fittings and more user-friendly.

ECU part number 038906019FE will be supplied. Swap with your standard ECU for an instant remap. This remap has been custom made for your vehicle type. All files are written well within the limits of a healthy engine.

PCV Fix Reparatursatz Kurbelgehäuse-Entlüftung für EA113 VAG 2.0 TFSI Motoren. Die hochwertige, aus vollem 6061-T6 Aluminium gefräste Adapterplatte ersetzt das anfällige, serienmäßige Kunstoffventil der Kurbelgehäuseentlüftung bei EA113 Motoren.

36-1 Universal trigger wheel. Designed to work with most crank sensors. Laser cut and rotary ground for high distinction pulsing.

The Teflon reusable hose ends are easier to install than cutter-style fittings and more user-friendly. Automotive / Aerospace-quality Teflon hose end. Only suitable for the AN-10 TEFLON / PTFE Hose. Fitting, PTFE Hose End, Straight, -10 AN Hose to Female -10 AN, Aluminum, Black, Each.

Fitting, Push On Hose End, Straight, -6 AN Hose to Female -6 AN, Aluminum, Black, Each. AN -6 STRAIGHT Push-On Hose Fitting Stealth Black. The barbed nipple can be inserted into 10mm - 12mm I.D. hose (with a bit of effort!).

AN -10 16mm I.D Black Billet Hose Separator. Black Billet Fuel Hose Separator. Hose Separator, -10 AN, 16mm, Aluminum, Black, Each. Suitable for the AN -10 Teflon Fuel Hose (NOT the Rubber Nitrile type as this has a larger O.D).

On top of that, there is a heat resistant nylon sheathing (upto 150 degrees celcius). The Nylon braided hose is significantly lighter and more flexible than the stainless steel braided version. AN -8 Nylon Braided Stealth Black Hose 0.5m.

Well, now you can get a helping hand with these magnetic vice jaw inserts by Torques. These vice jaw inserts will fit most vices with 3 in. jaws and allow the hose nut to be held in the vertical / horizontal plain and are designed to help hold your fittings securely in place during assembly.

MOCAL 80°C Thermostatic Oil Cooler Sandwich Plate 3/4" UNF & -10 AN JIC ADAPTERS. This Mocal oil cooler sandwich plate has a built-in thermostat so the oil will bypass the cooler until it reaches 80°C.

1 x Oil Catch Can. Clear tube indicator for easy visual of checking if the tank is full. Removes carbon and sludge build-up in the intake system, increases engine performance and service life. 1 x Oil Level Tube.

On top of that, there is a heavy duty, protective, full stainless steel braid on the outside, making it exceptionally lightweight, flexible, and durable. AN -4 Stainless Steel Braided Hose. Hose, Braided Stainless Steel, -4 AN, 1m.

AN -6 Teflon (PTFE) Stainless Steel Braided Hose. Only compatable with Teflon designed hose fittings. Teflon® Lined This hose can be used without hose fittings and secured over 8mm barbed fuel filter/pump fittings with the use of hose finishers.

What makes this product different is precision and quality. Besides, due to the fast processor and smart programming, every ignition pulse is taken care of individually so that it never occurs too early (or randomly as with other products) which would cause "detonation".

Female to Male Union Connector.

Thread Size: -1/8" NPT Male to 1/8" NPT Male. Fitting,Adapter, 1/8" NPT to 1/8" NPT, Aluminum, Blue, Each. Automotive / Aerospace-quality NPT Straight Reducer Adapter. Type: Adapter Part Number: TORQ-1/8TO1/8NPT.

Yes, fitting an EGR valve blanking plate will save the expense of replacing the worn EGR valve. A blanking plate without a hole in the centre will normally be needed for this as one with a hole will still leave the faulty original EGR valve partially operational.

A Silicone Intake hose for the Fiat 500 Abarth based on the standard Abarth hardipe, but with the size and flow maximised for improved performance. We also have products manufactured for ourselves and these are made to the highest standards.

Fitting, Push On Hose End, 90 Degree, -4 AN Hose to Female -4 AN, Aluminum, Black, Each. AN -4 90 Degree Push-On Hose Fitting in Stealth Black. Fitting Angle: 90 Degree. The barbed nipple can be inserted into7mm to 8.5mm I.D. hose (with a bit of effort!).

Passend für Ford Focus MK2 ST225 2,5l 5-Zylinder Mod. Die verbaute Feder entspricht der originalen. Es können aber bei Tuningfahrzeugen verstärkte Federn (T2) nachgerüstet werden. Forge Original Teile Nr.

Price:Chinese copies are generally much cheaper (especially direct from China). MAC have strict/structured pricing so considerably cheaper products are very unlikely to be genuine. Brass Muffler Fittings:We have noticed that nearly all of the Chinese fake valves are supplied with a brass coloured exhaust/muffler, so once again this can often be a very clear initial indication as these are not required and don’t really serve any purpose.

You are purchasing this product from Turbo Rebuild Ltd. Rear oil seal. CAN'T FIND WHAT YOU NEED?. Thrust bearing.

D1 Spec logo Printed. Beautifully Designed with Paddle. Made with Billet Aluminium. Quick Release length is approx 62mm. Can be used as a Security Feature. You will need a boss kit installed before fitting the Quick Release.

Two Silicone turbo hoses. (These will not fit the Forfour, the 800cc diesel Fortwo or the new 999cc Fortwo.). These hoses will resist higher temperatures and pressures than the original hoses and look stunning.

RPC Lightweight Chromoly Flywheels are made from 4140 one-piece billet chromoly steel. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance the air flow to improve the cooling of the clutch.

1x Set Of Five Denso Iridium IKH24 Spark Plugs that are especially suited to high power 5 Cylinder Focus engines running in excess of 320BHP. Denso Iridium Spark Plugs IKH24 (5346). (Focus RS and ST 320BHP+).

Fits : Discovery 2 TD5. Each hose is hand crafted using only the highest grade rubber silicones. We can make custom hose to your specification. Kit Contains : Turbo to the intercooler, intercooler to the inlet manifold and intercooler to intercooler pipe.

EGR Blanking Plate - 3mm Stainless - without hole. Yes, fitting an EGR valve blanking plate will save the expense of replacing the worn EGR valve. A blanking plate without a hole in the centre will normally be needed for this as one with a hole will still leave the faulty original EGR valve partially operational.

Model - Impreza EJ20 / EJ25. M14x1.5 female threaded ( To accept a banjo bolt or a AN-6/8 adapter). This adapter kit allows you to replace the plastic power steering line adapter with a threaded fitting allowing installation of AN fittings for a sturdier leak free installation.

These high flow fuel cell / tank bulkhead fittings feature a reverse taper flare (radius) entry design. This provides the maximum in unrestricted fuel flow without the turbulence of traditional bulkhead style fittings.

MTC Motorsport Ford Focus RS MK2 silicone air box intake hoses. This is a set of 2 silicone intake hoses that are Fluoro lined and very strong, you will not find a better quality hose!

0280150400 Motorsport Blue. 0280150401 Motorsport Blue. Complete fitting kit for 4 injectors. Problems should they occur Why buy from us?.

Part number 8504. Edelbrock Intake Manifold Bolt Kit. Designed specifically for Edelbrock manifolds, these bolt kits feature reduced hex heads for easy wrench access. Features include cadmium finished steel bolt and hardened washers.

Aus 1 mm Hochglanz VA Edelstahl. Sie verleiht ihrem Fahrzeug eine sehr edle Optik! Wird einfach mit doppelseitigen Klebeband (zb. 3m) befestigt. Einstiegsleisten "OPEL GT". Edle Einstiegsleisten (NEU) für den Opel GT.