• TREND Esquina Cincel C/cincel para Bisagra Jig

    Hinge Corner Chisel for Hinge Jig. Can be used with the Trend Hinge Jig. Trend Corner Chisel. Channel Islands, Isle of Wight, Isle of Man, Scilly Isles, Scottish Highlands, Scottish Islands, Northern Ireland, Republic of Ireland.
    13,95 EUR
    Vendedor excelente
    7,11 EUR de envío
    De Reino Unido
    142 vendidos
    Servicios aduaneros y de seguimiento internacional provistos
  • Trend SNAP/SB3/SET Snappy Destornillador de 56 piezas conjunto de bits

    Trend Snappy 56 Piece Colour Ring Bit Set - SNAP/SB3/SET. Assorted screwdriver bit set for a wide range of applications. Colour rings on bit shank to denote type for ease of identification. Set contains forty eight 25mm insert bits and seven 75mm long bits.
    28,00 EUR
    Vendedor excelente
    7,30 EUR de envío
    De Reino Unido
    ¡Solo queda 1!
    Servicios aduaneros y de seguimiento internacional provistos
  • Trend D/Levantamiento/B Puerta Y Bordo Elevador De Base Giratoria

    Ideal for carpenters, plasterers and drywall fixer. Trend Door and Board Lifter Swivel Base - D/LIFT/B. Raises up parallel. Foot operated freeing up the users hands. Size: 315 mm x 80 mm x 80 mm.
    19,03 EUR
    Vendedor excelente
    7,18 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • TREND STEALTH/1 Filtro de aire STEALTH P3 descuento de 1 Par

    Trend AIR Stealth Half Mask P3 Filters. 1 x Pair P3 filters. Air Stealth Instructions. Key Features. High Efficiency Particulate Air Composite. IF YOU ARE EXPERIENCING DIFFICULTIES VIEWING ONLINE VIDEO CONTENT.
    10,94 EUR
    Vendedor excelente
    7,08 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • TREND BSC/20/100 galletas para galletas canteadoras tamaño 20 Paquete de 100

    Trend Biscuit Jointer Biscuits. Trend biscuits are made of die cut beech. Compared to doweling, biscuit jointing is faster and more precise. They are ideal for strong, fast, and accurate jointing of hard and soft woods, plywood and composition board.
    7,88 EUR
    Vendedor excelente
    7,03 EUR de envío
    De Reino Unido
    79 vendidos
    Servicios aduaneros y de seguimiento internacional provistos
  • Trend BSC/10/1000 galletas para galletas ensambladora Talla 10 Caja de 1000

    Trend Biscuit Jointer Biscuits. Trend biscuits are made of die cut beech. Compared to doweling, biscuit jointing is faster and more precise. They are ideal for strong, fast, and accurate jointing of hard and soft woods, plywood and composition board.
    32,93 EUR
    Vendedor excelente
    7,37 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • TREND BSC/MIX/1000 galletas para galletas ensambladora Mezclado Tamaños Caja de 1000

    Trend Biscuit Jointer Biscuits. Compared to doweling, biscuit jointing is faster and more precise. Size 0, 10 and 20 - Box of 1000. 60 mm x 23 mm x 4 mm. 13 mm - 18 mm. 53 mm x 19 mm x 4 mm. 19 mm and over.
    32,93 EUR
    Vendedor excelente
    7,37 EUR de envío
    De Reino Unido
    17 usuarios lo han puesto en seguimiento
    Servicios aduaneros y de seguimiento internacional provistos
  • Tendencia gauge/d60 Digital Profundidad 60mm mandíbula

    The item you are currently viewing is the Trend GAUGE/D60 Digital Depth 60mm Jaw. Injection plastic moulding with plastic rule 60mm wide aperture. Resolution - 0.05 mm (0.002"). Opening width - 60 mm (2-3/8").
    18,98 EUR
    Vendedor excelente
    20,15 EUR de envío
    De Reino Unido
  • Calibrador de tendencia/profundidad D60 Digital 60 mm mandíbula

    It has an LCD readout for mm, imperial and fractions with auto shut off 5 mins. 60mm wide aperture. Trend GAUGE/D60 Digital Depth. Pin can be parked on arm. Diamond Blades. Product Specification. 3V CR2032 lithium battery.
    21,22 EUR
    Vendedor excelente
    25,76 EUR de envío
    De Reino Unido
  • Esquina Cincel & Cortador Router TREND Paquete Para Bisagra Jig TR12 + C/cincel

    TR12 x 1/4 TC. Hinge Corner Chisel for Hinge Jig. Can be used with the Trend Hinge Jig. Trend Corner Chisel. Designed for use on the Trend Hinge Jig. Suitable for Trend Hinge Jigs. Key Features. Light weight aluminium body design.
    28,94 EUR
    Vendedor excelente
    7,31 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Bloque de descuento TREND IT/7331021 Eje formadora 125 Mm x 50 Mm x 30 mm de diámetro

    Trend Rebating Block - Spindle Moulder Rebate Block. Suitable for producing various thickness rebates in softwood, hardwood and man-made boards (with or without coating) on a spindle moulder. 125mm dia x 50mm high x 30mm bore.
    104,30 EUR
    Vendedor excelente
    8,32 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Router de tendencia y hoja de sierra Medidor de Profundidad de/1 métricas/Imperial

    U section plastic injection moulding with unique cam lever lock. Key Features. Channel Islands, Isle of Wight, Isle of Man, Scilly Isles, Scottish Highlands, Scottish Islands, Northern Ireland, Republic of Ireland.
    12,91 EUR
    Vendedor excelente
    7,10 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Tendencia 3/43 X 8 MMTC Profesional Cortador Router dos flauta 8.0mm diámetro x 25.0mm Corte

    Two flutes give a clean finish to cut edges. Key Features. OL=70 mm (overall length). C=25 mm (cut length). Channel Islands, Isle of Wight, Isle of Man, Scilly Isles, Scottish Highlands, Scottish Islands, Northern Ireland, Republic of Ireland.
    24,04 EUR
    Vendedor excelente
    7,25 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • TREND DLB Caja de nivel de base magnética Digital Ángulo Buscador Mitre Saw Sierra De Mesa

    Trend DLB Digital Level Box. Magnetic base for hands free use - ideal for table or mitre saws. Angle sensor technology. Large backlight for easy reading of angle. Automatic digital inversion. Absolute level sensor.
    22,22 EUR
    Vendedor excelente
    7,22 EUR de envío
    De Reino Unido
    107 vendidos
    Servicios aduaneros y de seguimiento internacional provistos
  • Tendencia e/scribe tendencia easyscribe transcribir Herramienta

    The item you are currently viewing is the Trend E/SCRIBE Trend Easyscribe Scribing Tool. Parallel cutting line. Excellent for flooring.
    1.121,02 EUR
    Vendedor excelente
    20,15 EUR de envío
    De Reino Unido
    196 vendidos
  • Tendencia MS/PRO multiscribe perfil herramienta que empareja

    The item you are currently viewing is the Trend MS/PRO Multiscribe Profile Matching Tool. Built-in spirit level and pencil sharpener. A profile matching tool. Multi-function tool for a variety of marking out applications.
    1.122,14 EUR
    Vendedor excelente
    20,15 EUR de envío
    De Reino Unido
  • TREND STEALTH/ml Aire STEALTH RESPIRATOR media máscara de polvo Máscara Mediana/Grande APF20

    Approval P3(R) APF20 x WEL. Assigned Protection Factor - APF20. Trend AIR Stealth Respirator Half Mask. High Efficiency Particulate Air Composite. 1 x Stealth Air Mask M/L. New generation P3R half mask, ergonomically designed with low profile design.
    26,28 EUR
    Vendedor excelente
    7,28 EUR de envío
    De Reino Unido
    61 vendidos
    Servicios aduaneros y de seguimiento internacional provistos
  • Tendencia sigilo/Sm Aire Stealth Respirador Máscara de Polvo Media Máscara Pequeño/mediano APF20

    Approval P3(R) APF20 x WEL. Assigned Protection Factor - APF20. Trend AIR Stealth Respirator Half Mask. High Efficiency Particulate Air Composite. 1 x Stealth Air Mask S/M. New generation P3R half mask, ergonomically designed with low profile design.
    26,28 EUR
    Vendedor excelente
    7,28 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • /escriba fácil Scribe TREND E

    Trend Easy Scribe (E/SCRIBE). Marks narrow pencil line of 0.7mm width ensuring accuracy. Articulated arm allows the required offset to be set precisely from 1mm to 40mm giving full flexibility. Spare graphite refillls available.
    28,76 EUR
    Vendedor excelente
    7,31 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Trend D/Stand/Soporte de una puerta 32 Mm - 55 mm tredstand

    Holds door on its edge while routing hinge recess & mortise for locks. Adjustable clamp for doors 32 mm to 55 mm thick. Maximum door weight: 50 Kg. Holds door securely.
    51,40 EUR
    Vendedor excelente
    7,62 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Trend media máscara de Respirador De Seguridad Air Stealth-Medio/Grande

    The Trend Air Stealth is a new generation P3R half mask, ergonomically designed with low profile design. The mask is rated at APF20 with an Assigned Protection Factor 20. Conforms to half mask standard BS EN 140.
    26,82 EUR
    Vendedor excelente
    Precio de venta sugerido por el fabricante Precio anterior29,50 EUR
    De Reino Unido
    8,96 EUR de envío
  • Cortador De Router Profesional TREND 3/1x1/4TC dos flauta 5.0mm diámetro x 16.0mm Corte

    Two flutes give a clean finish to cut edges. Key Features. C=16 mm (cut length). Channel Islands, Isle of Wight, Isle of Man, Scilly Isles, Scottish Highlands, Scottish Islands, Northern Ireland, Republic of Ireland.
    23,00 EUR
    Vendedor excelente
    7,23 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Tendencia e/punzón herramienta fácil SCRIBE GRABADO

    Trend Easyscribe Offset Scribing Tool with Extendable Plate. Articulated arm allows the required offset to be set precisely from 1mm to 40mm giving full flexibility. Key Features 3 spare 2H lead refils.
    29,06 EUR
    Vendedor excelente
    8,96 EUR de envío
    De Reino Unido
    117 vendidos
  • Tendencia C 143 AX 8 MMTC Craft Pro Router cortador de una sola pieza Ranurar Cortador Corte 3.0 mm x

    Depth of cut can be changed by purchasing alternative bearing sizes. Easy to set-up and use. The grooving section of this tool cannot be detached from the shank. Hex key is supplied. Channel Islands, Isle of Wight, Isle of Man, Scilly Isles, Scottish Highlands, Scottish Islands, Northern Ireland, Republic of Ireland.
    21,70 EUR
    Vendedor excelente
    7,21 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Trend 3/61x1/4TC Profesional Cortador Router dos flauta 10.0mm diámetro x 25.0mm Corte

    Two flutes give a clean finish to cut edges. Key Features. C=25 mm (cut length). Channel Islands, Isle of Wight, Isle of Man, Scilly Isles, Scottish Highlands, Scottish Islands, Northern Ireland, Republic of Ireland.
    24,04 EUR
    Vendedor excelente
    7,25 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Trend 3/05x1/4TC Profesional Cortador Router dos flauta 3.0mm diámetro x 11.0mm Corte

    Two flutes give a clean finish to cut edges. Key Features. C=11 mm (cut length). Channel Islands, Isle of Wight, Isle of Man, Scilly Isles, Scottish Highlands, Scottish Islands, Northern Ireland, Republic of Ireland.
    20,32 EUR
    Vendedor excelente
    7,20 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Trend 3/4x3/8TC Profesional Cortador Router dos flauta 8.0 mm diámetro x 19.0 mm Corte

    Two flutes give a clean finish to cut edges. Key Features. C=19 mm (cut length). Channel Islands, Isle of Wight, Isle of Man, Scilly Isles, Scottish Highlands, Scottish Islands, Northern Ireland, Republic of Ireland.
    23,53 EUR
    Vendedor excelente
    7,25 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Cortador De Router Profesional TREND 4/26x1/2TC dos flauta 15.9mm diámetro x 25mm Corte

    TCT plunge centre tip. Two flutes give a clean finish to cut edges. Channel Islands, Isle of Wight, Isle of Man, Scilly Isles, Scottish Highlands, Scottish Islands, Northern Ireland, Republic of Ireland.
    36,15 EUR
    Vendedor excelente
    7,41 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Cortador De Router Profesional TREND 3/5x1/2TC dos flauta 9.0mm diámetro x 19.0mm Corte

    Two flutes give a clean finish to cut edges. Key Features. C=19 mm (cut length). Channel Islands, Isle of Wight, Isle of Man, Scilly Isles, Scottish Highlands, Scottish Islands, Northern Ireland, Republic of Ireland.
    25,19 EUR
    Vendedor excelente
    7,27 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Tendencia d/lift/a Puerta Levantador conector, un Para Colgar o la eliminación de puertas

    The item you are currently viewing is the Trend D/LIFT/A Door Lifter Jack A for Hanging or Removing Doors. Cam design with internal weight to keep level for ease of use. Extra care needed with veneered doors.
    46,70 EUR
    Vendedor excelente
    20,15 EUR de envío
    De Reino Unido
  • Trend 3/2x1/2TC Profesional Cortador Router dos flauta 6.0mm diámetro x 16.0mm Corte

    Two flutes give a clean finish to cut edges. Key Features. C=16 mm (cut length). Channel Islands, Isle of Wight, Isle of Man, Scilly Isles, Scottish Highlands, Scottish Islands, Northern Ireland, Republic of Ireland.
    26,74 EUR
    Vendedor excelente
    7,28 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • TREND BSC/0/100 galletas para galletas ensambladora tamaño 0 Paquete de 100

    Trend Biscuit Jointer Biscuits. Trend biscuits are made of die cut beech. Compared to doweling, biscuit jointing is faster and more precise. They are ideal for strong, fast, and accurate jointing of hard and soft woods, plywood and composition board.
    7,88 EUR
    Vendedor excelente
    7,03 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Tendencia de bloqueo/Jig/B ajustable bloqueo de comercio Jig Para Router

    Trend Fully Adjustable Trade Lock Jig. 115mm overall length. Fully adjustable for lock face plate length up to 250mm. Engraved for 16mm and 19mm lock width and 22.5mm and 25.4mm face plate widths. Quick and easy to set up using engraved lines for lock size and door sizes.
    108,15 EUR
    Vendedor excelente
    8,38 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Cortador De Router Profesional TREND 3/50x3/8TC dos flauta 9.5mm diámetro x 25.0mm Corte

    Two flutes give a clean finish to cut edges. Key Features. C=25 mm (cut length). Channel Islands, Isle of Wight, Isle of Man, Scilly Isles, Scottish Highlands, Scottish Islands, Northern Ireland, Republic of Ireland.
    26,74 EUR
    Vendedor excelente
    7,28 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Cortador De Router Profesional TREND 4/20x1/2TC dos flauta 16.0mm diámetro x 28.0mm Corte

    TCT plunge centre tip. Two flutes give a clean finish to cut edges. Key Features. Channel Islands, Isle of Wight, Isle of Man, Scilly Isles, Scottish Highlands, Scottish Islands, Northern Ireland, Republic of Ireland.
    31,74 EUR
    Vendedor excelente
    7,35 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • TREND C005BX1/4TC CRAFT Pro Router cortador dos flauta 6.0MM diámetro x 20.0MM Corte

    Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Channel Islands, Isle of Wight, Isle of Man, Scilly Isles, Scottish Highlands, Scottish Islands, Northern Ireland, Republic of Ireland.
    12,03 EUR
    Vendedor excelente
    7,09 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Vía rápida de tendencia Plano Cincel & Hoja Afilar Jig 25 y 30 grados

    33,59 EUR
    De Reino Unido
    11,85 EUR de envío
    Servicios aduaneros y de seguimiento internacional provistos
    o Mejor oferta
  • TREND C056AX1/2TC CRAFT Pro Router cortador RADIUS 9.5MM X 32.0MM X 80.0MM Corte Rad

    C056A is used with the Trend Draining Groove Jig. C=32 mm. OL=80 mm. Overall length=80 mm. These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.
    29,34 EUR
    Vendedor excelente
    7,32 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Tendencia de bloqueo/Jig/B ajustable bloqueo de comercio Jig Para Router & Cortador C172

    Includes C172x1/2TC lock jig cutter. LOCK/JIG/B & Trend C172x1/2TC Cutter. 115mm overall length. Fully adjustable for lock face plate length up to 250mm. Engraved for 16mm and 19mm lock width and 22.5mm and 25.4mm face plate widths.
    121,13 EUR
    Vendedor excelente
    8,54 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • TREND gauge/Router 1 Medidor de profundidad-métricas/Imperial

    60 mm wide aperture & accurate to 0.5 mm. Key Features Black & Decker. Diamond Blades. Small Plant.
    9,52 EUR
    Vendedor excelente
    10,08 EUR de envío
    De Reino Unido
    5 usuarios lo han puesto en seguimiento
  • Tendencia H/Jig/una parte dos Cortador De Bisagra Jig + TR12 + cincel de esquina de tendencia + Estuche

    The item you are currently viewing is the Trend H/JIG/A Two Part Hinge Jig TR12 Cutter Trend Corner Chisel Case. Suitable for timber based doors and square butt hinges. Quick clean and simple to set-up as the hinge is used as the pattern.
    225,09 EUR
    Vendedor excelente
    20,15 EUR de envío
    De Reino Unido
    55 vendidos
  • Tendencia sigilo/2 aire Stealth Máscara Caja de almacenamiento

    Channel Islands, Isle of Wight, Isle of Man, Scilly Isles, Scottish Highlands, Scottish Islands, Northern Ireland, Republic of Ireland. Adjustable shoulder strap and belt loop. Hard case with zip closure.
    19,73 EUR
    Vendedor excelente
    7,19 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Radio de abertura TREND Ar/Jig Jig

    Trend Aperture Radius Jig. Each set of external radius curves is paired with a set of peg holes that will set the jig to work top edge. Jig has a 45 degree end cut, plus 26mm and 35mm cabinet door hinge recess facility.
    103,92 EUR
    Vendedor excelente
    8,32 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Trend bloqueo/Jig/B Comercio Cerradura Jig para el Router C/W Trend Cortador Y Esquina Cincel

    Trend C172x1/2TC Cutter & Trend Corner Chisel. Includes C172x1/2TC lock jig cutter. Plastic laminate body with aluminium clamping bar, with clamping range 30mm to 80mm. 115mm overall length. Quick and easy to set up using engraved lines for lock size and door sizes.
    139,05 EUR
    Vendedor excelente
    8,79 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • TREND C198X1/2TC CRAFT Pro Router cortador guiada OVOLO/Round over 16.0 mm Rad

    If the cutter is lowered, a top quirk can be produced. Use the larger bearing for a round-over. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece.
    32,02 EUR
    Vendedor excelente
    7,36 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Tendencia Snappy 90 * ángulo Destornillador Accesorio Mark 2 Snap/ASA/2

    Use with bit holders, direct drive or insert screwdriver bits, hex drills and drill/countersinks. Can be used with impact screwdrivers with following specification - maximum 12v, maximum torque 80nm (816 kgf.cm), rotation 0-2000 rpm and 0-2500 impacts per min.
    34,71 EUR
    Vendedor excelente
    7,39 EUR de envío
    De Reino Unido
    13 usuarios lo han puesto en seguimiento
    Servicios aduaneros y de seguimiento internacional provistos
  • Trend KFP/1 Cocina instaladores Router Cortadores (paquete de 3)

    3 x Worktop cutter 1/2in. D: 12.7 mm x 50mm cut. Straight two flute.
    39,48 EUR
    Vendedor excelente
    20,15 EUR de envío
    De Reino Unido
  • TREND C166X1/2TC CRAFT Pro Router cortador guiada plantilla Profiler 19.1MM diámetro x 5

    Extra care must be taken to avoid cutter breakage. Use for rebating and trimming edges only. Channel Islands, Isle of Wight, Isle of Man, Scilly Isles, Scottish Highlands, Scottish Islands, Northern Ireland, Republic of Ireland.
    38,00 EUR
    Vendedor excelente
    7,44 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
Dinos qué te parece - se abre una nueva ventana o pestaña