Dc dc step up boost

ElMT3608 es móduloelevador de tensión DC tipo boost. Un convertidor tipo boost es un tipo de fuente conmutada que tiene la capacidad de elevar el voltaje de entrada, por ello son llamados convertidoresstep up.

Salida máxima: 8 W.

1pc x LM2587 DC-DC Boost Converter. Module Properties:non-isolated step-up module(Boost). Output current: 5A MAX, (15mA unload). Conversion efficiency: 92% (MAX). Output ripple: 50mV (MAX). Switching frequency: 100KHz.

Características del módulo: no aislado step-up & down módulo (BOOST y Buck). Characteristics of the module: not isolated step-up & down module (BOOST and Buck). Lo mas positivo de este modulo es que el voltaje de salida puede estar por encima y pordebajo del voltaje de entrada.

1pc x DC 3V-6V to 400kV 400000V Boost Step up Power Module. High pressure type: the type of pulse current.

The output can be up to 65W(and can further reach 100W when enhance heat-transfer). The module has high power output and efficiency(up to 96%). Output Current:6A(max). Size:67.5x41.5x14/2.66"x1.63x0.55"(approx).

Module type:Non-isolated boost. Module feature:XL6019 step up module. 1Pcs 5A DC-DC Step Up Power Module. Input current:3A(maximum 5A). Size:5cmx2.8cmx1.2cm(2.28"x1.10"x0.47"). Load regulation:+-0.5%.

1 x 400W Boost Converter. Module properties: non-isolated step-up module (BOOST). Conversion efficiency: up to 96%. Single module: 60g. Module size: 67mm X48mm X 28mm (LxWxH). Installation: 4pcs 2.55mm screw holes.

2pcs x DC-DC SX1308 Module. Maximum current output: 2A. Efficiency is as high as 95%.

1Pcs step up volt converter power. Output current: peak 2A. Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item.

1pc x DC 400W 15A Step-up Boost Converter. Module properties: non-isolated step-up module (BOOST). Conversion efficiency: up to 96%. driving high-power LED lights. Single module: 80 g. Module size: 67mm X48mm X 28mm (LxWxH).

Module Size: 50 x 37 x 13mm. Output power: natural cooling 15W. hope you could understand. El 23-ene-18 a las 03:26:43 H.Esp, el vendedor añadió los siguientes datos.

High-power LED constant current driver. Module Size: 50 x 37 x 13mm. Output: OUT+ output is positive, OUT- output negative. Input: IN+ input Positive is, IN- input negative. Output short circuit protection: Yes, constant current.

1pc x 20kV high pressure igniter. High type: pulse current. InputLine Length: approx. 110 mm (red is positive).

Cantidad: 5pcs. Corriente de salida máxima: 2A. Voltaje de entrada: 2 ~ 24V. USA, Canada, United Kingdom, Austrilia, France, Germany, Spain, Ireland, Italy, Others. Canada, United Kingdom, Austrilia, France, Germany, Spain, Ireland, Italy, Others.

Modules nature: Non-isolated step-up (Boost). Input current: 4A (max), No-load current 18mA. Switching frequency: 400KHz. Short Circuit Protection: NONE.

Enter 36V 20A = 720W, input 48V 20A = 960W, input 60V 20A = 1200W. Module Properties: non-isolated step-up module (BOOST). Input Current: 20A. The current per module can be adjusted to 15A. Short circuit protection: Yes (input 20A fuse) double short circuit protection, the use of more security.

Convertidor de tension DC a DC elevador de voltaje step up. Boost converter con circuito integrado XL6009.<br>

1 x XL6009 Boost Step-up Module. Module features: Non-isolated boost. hope you could understand. All products are quality checked. We will be happy to resolve any issues you may have in a cordial and friendly manner.

Potencia: 200W MAX (voltaje de entrada superior a 30V). Módulos : step-up no aislado (Boost). Modules: non-isolated step-up (Boost). Corriente de entrada: 10A (max). Input current: 10A (max). Voltaje de entrada: 6V-35V.

ELEVADOR DE TENSIÓN DC DC STEP UP BOOST 2,8 V – 6 V a 12 V ARDUINO RELE. Modulo Step Up Boost 12 V con 4 pines soldados. Tolerancia en la tensión de salida 12V ±1,5%. Voltaje de Salida = 12 V. Entrada 3 V, 1 A, salida 12 V 220 mA;.

Peak current output current does not exceed 2A. Efficiency: >93%.

Hope you could understand. All products are quality checked. We will be happy to resolve any issues you may have in a cordial and friendly manner.

(1 x Boost Module. 2) the peak current output current is no more than 2A. Efficiency: > 93% (efficiency is related to the differential pressure of input and output).

This automatic buck module solves this problem . Model Specification：DSN6000AUD Automatic Buck module. Module Properties：Non- isolated boost (BOOST). For 12V electrical work hard at work. Built- 4A efficient MOSFET switches enable efficiency up to 94%; (LM2577 current is 3A).

[1 x 400W Boost Converter. Constant] range: 0.2-12A. Module properties: non-isolated step-up module (BOOST). Conversion efficiency: up to 96%. driving high-power LED lights. hope you could understand.

Este & nbsp; DC-DC El módulo convertidor es un convertidor reductor (escalonado) combinado con un impulso Convertidor (elevador), cuyo voltaje de salida puede ser más bajo o más alto que la entrada.

Output Power : natural cooling 100W (MAX), strengthening cooling 150W (MAX) real power. Output Current : 10A(MAX). 1Pc x Module. And due to the difference between different monitors, the picture may not reflect the actual color of the item.

Conversion efficiency: 92%(Max). ● 1 x DC-DC Step Up Power Module. Output: 5V / 2A ± 5% (MAX) Typical 1.5A. Load capacity: 2A(Max) Typical 1.5A. Working instructions: 5V output blue LED light. Static power consumption: 80uA.

The converter 15KV is the highest output, so its limit output should be not more than 15KV, that is 1.5cm arc. 15VKE = 1 type boost converter x1pc. High Pressure Ignition Distance: <=0.5cm. N20 triode x1pc.

1Pcs step up volt converter power. Output current: peak 2A. Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item.

Module type:Non-isolated boost. Module feature:XL6019 step up module. 1Pcs 5A DC-DC Step Up Power Module. Input current:3A(maximum 5A). Load regulation:+-0.5%. Output ripple:<100mV. Switching frequency:220KHz.

The converter 15KV is the highest output, so its limit output should be not more than 15KV, that is 1.5cm arc. 15VKE = 1 type boost converter x1pc. High Pressure Ignition Distance: <=0.5cm. UF4007 diode x1pc.

Módulo elevador de tensión DC-DC basado en el chip XL6009. Estos módulos de potencia se caracterizan por trabajar a muy altos rangos de frecuencia, para este módulo la frecuencia de operación es de 400KHz.

1pc x DC 400W 15A Step-up Boost Converter. Module properties: non-isolated step-up module (BOOST). Conversion efficiency: up to 96%. driving high-power LED lights. Installation: 4 2.55mm screw holes.

Maximum current output: 2A. Switching frequency: 1.2MHz.

Con dos pilas AA – salida 5V / 500 ~ 600MA. Corriente de Salida Máx 600mA. 1 x Módulo boost convertidor 0,9V-5V /5V 600mA. El Boost convertidor proporciona un rendimiento estable en la salida de 5V incluso cuando funciona con dos pilas AA.

Convertidor DC-DC de 250W y hasta 10A en placa de aluminio. Facilita la instalación. Tipo de módulo: BOOST no aislado. Corriente entrada: 10A (MAX), para mas de 8A tener en cuenta el calentamiento. Corriente salida: 10A MAX, para mas de 6A tener en cuenta el calentamiento.

The output can be up to 65W(and can further reach 100W when enhance heat-transfer). The module has high power output and efficiency(up to 96%). Output Current:6A(max). Size:67.5x41.5x14/2.66"x1.63x0.55"(approx).

Enter 36V 20A = 720W, input 48V 20A = 960W, input 60V 20A = 1200W. Module Properties: non-isolated step-up module (BOOST). Input Current: 20A. The current per module can be adjusted to 15A. Short circuit protection: Yes (input 20A fuse) double short circuit protection, the use of more security.

Peak current output current does not exceed 2A. Efficiency: >93%.

Tamaño reducido, Frecuencia de trabajo 150 khz. eficiencia del 85%. Entrada por encima de 3 v, salida 5 V 400-500 mA;. Entrada 2-3 v, salida 5 V 160-400 mA;. Entrada 1.5-2 v, salida 5 V 110-160 mA;.

Support low power mode;. Output power Input 1.2-2V,output power within 2W;. Input 2V-20V,output power within 3W;. Input 20V-24V,output power with in 2.5W;. LED drive power;. Power conversion. One button to turn off the output;.

(Output power: natural cooling 100W (MAX), strengthening cooling 150W (MAX) real power. reduce power to use, or - enhance cooling). Dynamic response speed: 200uS 5%. Load regulation: ± 0.5%. No-load current: 25mA typical.

Module Properties: non-isolated step-up module (BOOST). The new version of the high-current step-up circuit using efficient booster circuit, with a good high-current MOS tube output current of 3A. Input 4.2V Output 5V 3A 40mV (MAX).

2pcs x DC 3V-6V to 400kV 400000V Boost Step up Power Module. High pressure type: the type of pulse current.

Tiny DC Step-Up Boost Module 3V-5V, 1A. Step-Up booster de 1A con tensión de entrada de 1-5V y salida a 5V. Corriente de salida de 1A, potencia nominal 5W. Disponible envío urgente a península, consulte condiciones.

Module Feature: Non-isolation booster. Long press: the state of low power consumption, the digital tube and the lights are out, the normal work of the module. Normal display. Moderate press: Enter the fine-tuning state.