Controladores y drivers de IED

LCD I2C Interface Adapter 1602 2004 PCF8574 Contrast 5V Arduino. Flux SKU 16pin LCD. This module is ideally suited to interfacing with an LCD display in your project. It is compatible with the common 1602 and 2004 LCD modules with which it can be directly soldered onto.

LC Technology. Flux SKU This module is ideally suited to interfacing with an LCD display in your project. It is compatible with the common 1602 and 2004 LCD modules with which it can be directly soldered onto.

This TFT display has a 3.5in screen and is a variant on the usual LCD-type display, using Thin-Film Transistor (TFT) technology to produce an RGB colour display with faster response times and a vast improvement in image quality.

Constant voltage (radio frequency) receiver that is suitable for use with LED strip tape. Allows you to control one or up to eight zones using one controller. Can also be used with constant current receivers so you can control different types of LED lights from the same controller.

Flux SKU This module is ideally suited to interfacing with an LCD display in your project. It is compatible with the common 1602 and 2004 LCD modules with which it can be directly soldered onto. While drastically reducing the number of required connections the unit also features a potentiometer to control the contrast of the connected display.

This controller is designed to be used with a RepRap RAMPS interface board such as our RAMPS compatible shield (HC3DPR0002). Using this module allows you to print your designes without requiring a computer be connected to your printer.

Mode LEDdrive Mini, Constant Current LED Driver LD-0500-36-MT-230-RD (500mA, Vf 12 to 36, Mains Dimmable). Mode lighting - LD-0500-36-MT-230-RD box of 10. Mode lighting constant current driver tested with atrium fitting.

Constant current 700ma RF (radio frequency) receiver that is suitable for use with LED ground lights and LEDs that require a 700ma supply. Constant current is not generally used with LED tape which is constant voltage, see SR-1009FA for constant voltage version.

Der PLD-01 750 ist ein Schutzschalter für eine entsprechende Stromversorgung der LED Beleuchtung (POWER LED DRIVER). Die Versorgung der Leistungsdioden (LED) erfordert die Anwendung der entsprechenden Quelle der Versorgungsspannung.

Type controller. We can pick the serviceable part from you or you can send it to us. Input/Output 12-24Vdc.

We can pick the serviceable part from you or you can send it to us. Type motion controller.

12Vdc/24Vdc MAX 8A for mounting into Led profiles, touch sensitive, Functions: Off, 25%, 50%, 75%, 100%. We can pick the serviceable part from you or you can send it to us. Toggle navigation. Type controller.

80 CHANNEL OUTPUT LIQUID CRYSTAL DISPLAY DRIVER.

We can pick the serviceable part from you or you can send it to us. 12Vdc/24Vdc MAX 8A, Hand-wave sensitive (IR) turns on-off in short hand move. Current 8A. Type motion controller.

We can pick the serviceable part from you or you can send it to us.

Desktop remote dimmer for perfect-RF series LED remote systems. Compatable with SR-1009FA receiver. Type controller.

RF rotary dimmer SR-2805R/2805D is remote dimmer controller with rotary knob to switch and dim single color LED lighting. Designed with high strength tempered glass material, the rotary dimmer features sooth dimming without any flickering from 0.1% to 100%.

We can pick the serviceable part from you or you can send it to us. Current 4x6A. Type amplifier.

SR-2801 is a remote wireless LED dimmer switch with RF signal output to switch and dim single color LED lighting. With imported battery inside, the remote dimmer switch can be powered for up to 2 years and you do not have to replace the battery frequently.

Adjustable, Rated Load Max.300W, Ambient Light <3-2000LUX Adjustable. We can pick the serviceable part from you or you can send it to us. Current 1.3A 230V. Type motion controller.

Device is for controlling DJ-01 controller. Working in radio signal 433.92 MHz, Maximum working distance 150m in an open space, dimmensions: 80x80x10 mm, Made in EU! We can pick the serviceable part from you or you can send it to us.

Type controller. Toggle navigation. We can pick the serviceable part from you or you can send it to us.

Input/Output 5-24Vdc 450W, max 8A channel ; dimensions 155x105x28mm. Current 3x8A. Type controller. We can pick the serviceable part from you or you can send it to us.

12Vdc/24Vdc MAX 8A, touch sensitive dimms LED strip by touching LED profile, turns on-off. Spring is cutable, it must touch the cover. We can pick the serviceable part from you or you can send it to us.

We can pick the serviceable part from you or you can send it to us. Input/Output 12-24Vdc max power 12A for all chanels, two seperate outputs with 3 channels adjustable sound sensitivity. Type controller.

It is designed with 4 channels and maximum 5A/channel output. Built-in RF receiver enables the LED light controller to be wireless controlled by remote and wall mounted controllers and be compatible with a variety of remotes to control single color, dual color and RGB/RGB W LED lights especially LED strip lights.

12V, 12A Mode, seed/brightness, colour. Type controller. We can pick the serviceable part from you or you can send it to us. Toggle navigation.

We can pick the serviceable part from you or you can send it to us. Type controller. Toggle navigation. Input/Output 12-24Vdc 144W-288W, max 4A channel ; dimensions 45x85x23 mm.

Single-channel controller ; Input. 12-24VDC Output. 12-24Vdc, PWM control, load <8A ; dimensions 89x59x55mm. Current 8A.

The SR-8001 series is a and sensor switch with high sensitivity and detection range of 1-10cm. The and sensor switch is designed with compact size. For SR-8001A, hand wave will turn on or turn off the light and any reflection within the detection range would switch on the light and swicth off when a new motion is detected.

/ Output. 12Vdc 288W, RF transmitter, the channel 8A, 9 management programs, can be combined with 15m HM-5050-60-RGBm. We can pick the serviceable part from you or you can send it to us. Current 3x8A.

Input/Output 12Vdc 288W, 24Vdc 576W ; max 8A channel ; dimensions 105x65x23mm ; Possible to connect flexible LED RGB 14.4W - 20m, 9.6W - 30m ; 7.2W - 40m ;. Current 3x8A. Type amplifier.

We can pick the serviceable part from you or you can send it to us. Toggle navigation. Type controller.

Current 3x2A. Type controller. We can pick the serviceable part from you or you can send it to us. Input/Output 5-12Vdc 144W, 12A.

RGB LED controller SR-2805DRGB is a rotary controller with wireless RF signal to control RGB LEDs. The desktop led controller is designed with both switch and brightness adjustment function. Smooth brightness adjustment from 0.1%-100% without flickering can protect human eyes.

The SR-2005 is a and hand-wave sensor dimmer with high sensitivity and maximum detection range of 10cm. The light will be switched on/off when you put your hand in or move your hand away from the sensoring area and a dimming duration will happen when your hand stays in the sensoring area for a while (cycling diming: darkest-brightest-darkest-brightest.).

Controls two strips (CW and WW) input output 144W 12Vdc, 24Vdc 288W, max 6A channel ; dimensions 83x79x33mm. We can pick the serviceable part from you or you can send it to us. Current 2x6A. Type controller.

We can pick the serviceable part from you or you can send it to us. Toggle navigation. Type motion controller.

We can pick the serviceable part from you or you can send it to us. Suitable power supplies: 30W/12V. PWM frequency: ± 770 Hz. Current 2A. Toggle navigation.

Single-channel controller, input / output 12Vdc or 24Vdc, max 8A. Current 8A. Type controller.

Single-channel controller ; Input. / Output. female/male 12Vdc, max 2A. Current 2A.

We can pick the serviceable part from you or you can send it to us. Current 3x2A. Type controller.

SR-2828 is an easy-to-use RF touch led dimmer which controls 1 zone with dimming range from 0.1%-100%. The remote led dimmer features ultra sensitive touch control, smooth dimming without any flickering and a control distance of over 20 meters.

Lightning dimmer for incandescent or dimmable LED bulbs up to 300W. Type controller.

Input/Output 12Vdc. Max power 90W. Suitable with digital LED RGB strip with WS2811 microchip, can control up to 600 pixels, 300 programs with memory. We can pick the serviceable part from you or you can send it to us.