• Cuchilla Cortador 92mm Holesaw Starrett

    R&S Starrett 92 mm cutter blade used once.
    4,61 EUR
    0 pujas
    10,99 EUR de envío
    Que finalicen el Hoy a las 22:13 H.Esp46 m 31 sDe Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • 2x Hoja de sierra de cinta Starrett Bimetal M42 de 2825x27x0,90mm 5/8 VP.

    2 unidades.
    15,00 EUR
    Vendedor excelente
    5,00 EUR de envío
    Marca: Starrett
    o Mejor oferta
  • Starrett 177mm Bi Metal £ 10 cada comprar a granel X5! nuevo!

    5 x new old stock starter hole saws 177mm would cost you £65 each So grab a bargain £50!
    57,60 EUR
    0 pujas
    11,29 EUR de envío
    Que finalicen el domingo a las 19:04 H.Esp3 d 21 h
    o Mejor oferta
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Coronas bimetálicas HSS y diamantadas taladro Starrett y Morse 5" y 5 1/2"

    La corona Morse nunca se ha llegado a usar y las Starret están usadas pero sin ningún diente roto o desgatado. Juego de tres coronas perforadoras.
    90,00 EUR
    Marca: Corona
    12,00 EUR de envío
    o Mejor oferta
  • Starrett SM40 40mm TCT de carburo de tungsteno Holesaw Para Acero Inoxidable

    Do not push too hard, to avoid an impact of the TCT teeth. Once the teeth touch the material, drill with slight steady pressure. Ideal for production cutting. High cutting accuracy. Should only be used to cut flat surfaces.
    23,03 EUR
    Vendedor excelente
    7,43 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett MPH0100 TCT corte rápido Multi propósito Holesaw 25mm

    Starrett Part no: BF1520. Size: 25mm. The increased cutting depth allows for cutting through strapping and joists.
    18,69 EUR
    Vendedor excelente
    7,37 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett SM80 80mm TCT Carburo De Tungsteno De Acero Inoxidable Inox hoja Holesaw para

    Starrett tungsten carbide holesaws complete with arbor Product information Starrett Tungsten Carbide Tipped Stainless Steel Hole Saws are ideal for cutting high alloy & stainless steels, non ferrous light metals and reinforced fabrics. The tough tungsten carbide tipped teeth have a positive cutting angle which provides fast and efficient removal of chips and swarf Advantages of these TCT holesaws: Ideal for production cutting. Tungsten carbide tipped teeth provide superb product life and cutting performance. High cutting accuracy. Complete assembly - there is no requirement to purchase a separate arbor and pilot drill. Safety stop collar at the base of the hole saw Product images are of a different size and are for illustration only Maximum cutting depth 2mm.
    39,75 EUR
    Vendedor excelente
    27,65 EUR de envío
    De Reino Unido
    ¡Solo queda 1!
  • Starrett MPH0212 TCT corte rápido Multi propósito Holesaw 64mm

    Starrett Part no: BF1595. The increased cutting depth allows for cutting through strapping and joists.
    27,90 EUR
    Vendedor excelente
    7,50 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett MPH0238 TCT corte rápido Multi propósito Holesaw 60mm

    Starrett Part no: BF1590. The increased cutting depth allows for cutting through strapping and joists.
    27,74 EUR
    Vendedor excelente
    7,50 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett SM65 65mm TCT Carburo De Tungsteno De Acero Inoxidable Inox hoja Holesaw para

    Starrett tungsten carbide holesaws complete with arbor Product information Starrett Tungsten Carbide Tipped Stainless Steel Hole Saws are ideal for cutting high alloy & stainless steels, non ferrous light metals and reinforced fabrics. The tough tungsten carbide tipped teeth have a positive cutting angle which provides fast and efficient removal of chips and swarf Advantages of these TCT holesaws: Ideal for production cutting. Tungsten carbide tipped teeth provide superb product life and cutting performance. High cutting accuracy. Complete assembly - there is no requirement to purchase a separate arbor and pilot drill. Safety stop collar at the base of the hole saw Product images are of a different size and are for illustration only Maximum cutting depth 2mm.
    33,70 EUR
    Vendedor excelente
    27,65 EUR de envío
    De Reino Unido
    ¡Solo queda 1!
  • Starrett DCH0158 Profundo Corte Bi-Metal Holesaw 41mm

    Starrett Part no: BF6075.
    21,04 EUR
    Vendedor excelente
    7,41 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett DCH1136 Profundo Corte Bi-Metal Holesaw 46mm

    Starrett Part no: BF6090.
    21,68 EUR
    Vendedor excelente
    7,42 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett MPH0300 TCT corte rápido Multi propósito Holesaw 76mm

    Starrett Part no: BF1620. The increased cutting depth allows for cutting through strapping and joists.
    29,50 EUR
    Vendedor excelente
    7,52 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett MPH0296 TCT corte rápido Multi propósito Holesaw 65mm

    Starrett Part no: BF1600. The increased cutting depth allows for cutting through strapping and joists.
    28,19 EUR
    Vendedor excelente
    7,50 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett SM51 51 mm TCT de carburo de tungsteno Holesaw Para Acero Inoxidable

    Do not push too hard, to avoid an impact of the TCT teeth. Once the teeth touch the material, drill with slight steady pressure. Ideal for production cutting. High cutting accuracy. Should only be used to cut flat surfaces.
    25,69 EUR
    Vendedor excelente
    7,47 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett DCH0212 Profundo Corte Bi-Metal Holesaw 64mm

    Starrett Part no: BF6135.
    24,19 EUR
    Vendedor excelente
    7,45 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett MPH0312 TCT corte rápido Multi propósito Holesaw 89mm

    Starrett Part no: BF1640. The increased cutting depth allows for cutting through strapping and joists.
    32,75 EUR
    Vendedor excelente
    7,57 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett DCH0300 Profundo Corte Bi-Metal Holesaw 76mm

    Starrett Part no: BF6165.
    25,53 EUR
    Vendedor excelente
    7,47 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett DCH0318 Profundo Corte Bi-Metal Holesaw 79mm

    Starrett Part no: BF6170.
    25,98 EUR
    Vendedor excelente
    7,48 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett DCH0234 Profundo Corte Bi-Metal Holesaw 70mm

    Starrett Part no: BF6155.
    24,69 EUR
    Vendedor excelente
    7,45 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett SM32 32mm TCT Carburo De Tungsteno De Acero Inoxidable Inox hoja Holesaw para

    Starrett tungsten carbide holesaws complete with arbor Product information Starrett Tungsten Carbide Tipped Stainless Steel Hole Saws are ideal for cutting high alloy & stainless steels, non ferrous light metals and reinforced fabrics. The tough tungsten carbide tipped teeth have a positive cutting angle which provides fast and efficient removal of chips and swarf Advantages of these TCT holesaws: Ideal for production cutting. Tungsten carbide tipped teeth provide superb product life and cutting performance. High cutting accuracy. Complete assembly - there is no requirement to purchase a separate arbor and pilot drill. Safety stop collar at the base of the hole saw Product images are of a different size and are for illustration only Maximum cutting depth 2mm.
    22,47 EUR
    Vendedor excelente
    27,65 EUR de envío
    De Reino Unido
    12 vendidos
  • Starrett DCH0278 Profundo Corte Bi-Metal Holesaw 73mm

    Starrett Part no: BF6160.
    25,14 EUR
    Vendedor excelente
    7,47 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett DCH0358 Profundo Corte Bi-Metal Holesaw 92mm

    Starrett Part no: BF6190.
    28,91 EUR
    Vendedor excelente
    7,51 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett DCH0312 Profundo Corte Bi-Metal Holesaw 89mm

    Starrett Part no: BF6185.
    28,27 EUR
    Vendedor excelente
    7,50 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett MPH0234 TCT corte rápido Multi propósito Holesaw 70mm

    Starrett Part no: BF1610. The increased cutting depth allows for cutting through strapping and joists.
    28,50 EUR
    Vendedor excelente
    7,51 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett MPH0334 TCT corte rápido Multi propósito Holesaw 95mm

    Starrett Part no: BF1650. The increased cutting depth allows for cutting through strapping and joists.
    36,13 EUR
    Vendedor excelente
    7,62 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Nuevo anuncioStarrett FCH0358 rápido corte Bi-Metal Holesaw 92mm

    The Starrett Fast Cut Bi-Metal Holesaws combine a new tooth material and a 5.5 TPI/25mm tooth form, with increased resistance to heat and wear. Providing a smoother, faster cut on a wide range of materials, when compared to the previous constant pitch saw. Specifically suited to cutting stainless and mild steel sheet, they will also cut through tubes with a wall thickness of up to 3mm (1/8in). Cutting Depth: 41mm. Starrett FCH0358 Fast Cut Bi Metal Holesaw has the following specification: Diameter: 92mm (3.5/8in). PTDSTRHS92AX.
    15,39 EUR
    Vendedor excelente
    14,18 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett MPH68MM TCT corte rápido Multi propósito Holesaw 68mm

    Starrett Part no: BF1607. The increased cutting depth allows for cutting through strapping and joists.
    28,47 EUR
    Vendedor excelente
    7,51 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett MPH0318 TCT corte rápido Multi propósito Holesaw 79mm

    Starrett Part no: BF1625. The increased cutting depth allows for cutting through strapping and joists.
    30,00 EUR
    Vendedor excelente
    7,52 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett MPH0278 TCT corte rápido Multi propósito Holesaw 73mm

    Starrett Part no: BF1615. The increased cutting depth allows for cutting through strapping and joists.
    29,02 EUR
    Vendedor excelente
    7,51 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett SM100 100mm TCT Carburo De Tungsteno De Acero Inoxidable Inox hoja Holesaw para

    Starrett tungsten carbide holesaws complete with arbor Product information Starrett Tungsten Carbide Tipped Stainless Steel Hole Saws are ideal for cutting high alloy & stainless steels, non ferrous light metals and reinforced fabrics. The tough tungsten carbide tipped teeth have a positive cutting angle which provides fast and efficient removal of chips and swarf Advantages of these TCT holesaws: Ideal for production cutting. Tungsten carbide tipped teeth provide superb product life and cutting performance. High cutting accuracy. Complete assembly - there is no requirement to purchase a separate arbor and pilot drill. Safety stop collar at the base of the hole saw Product images are of a different size and are for illustration only Maximum cutting depth 2mm.
    52,71 EUR
    Vendedor excelente
    27,65 EUR de envío
    De Reino Unido
    10 vendidos
  • Starrett DCH0034 Profundo Corte Bi-Metal Holesaw 19mm

    The Starrett Deep Cut Bi-Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick. Cutting Depth: 51mm. Starrett DCH0034 Deep Cut Bi-Metal Holesaw has the following specification: Diameter: 19mm (3/4in). PTDSTRHS19DC.
    5,89 EUR
    Vendedor excelente
    10,60 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett SM50 50mm TCT Carburo De Tungsteno De Acero Inoxidable Inox hoja Holesaw para

    Starrett tungsten carbide holesaws complete with arbor Product information Starrett Tungsten Carbide Tipped Stainless Steel Hole Saws are ideal for cutting high alloy & stainless steels, non ferrous light metals and reinforced fabrics. The tough tungsten carbide tipped teeth have a positive cutting angle which provides fast and efficient removal of chips and swarf Advantages of these TCT holesaws: Ideal for production cutting. Tungsten carbide tipped teeth provide superb product life and cutting performance. High cutting accuracy. Complete assembly - there is no requirement to purchase a separate arbor and pilot drill. Safety stop collar at the base of the hole saw Product images are of a different size and are for illustration only Maximum cutting depth 2mm.
    29,95 EUR
    Vendedor excelente
    27,65 EUR de envío
    De Reino Unido
    ¡Solo queda 1!
  • Starrett SM40 40mm TCT Carburo De Tungsteno De Acero Inoxidable Inox hoja Holesaw para

    Starrett tungsten carbide holesaws complete with arbor Product information Starrett Tungsten Carbide Tipped Stainless Steel Hole Saws are ideal for cutting high alloy & stainless steels, non ferrous light metals and reinforced fabrics. The tough tungsten carbide tipped teeth have a positive cutting angle which provides fast and efficient removal of chips and swarf Advantages of these TCT holesaws: Ideal for production cutting. Tungsten carbide tipped teeth provide superb product life and cutting performance. High cutting accuracy. Complete assembly - there is no requirement to purchase a separate arbor and pilot drill. Safety stop collar at the base of the hole saw Product images are of a different size and are for illustration only Maximum cutting depth 2mm.
    27,07 EUR
    Vendedor excelente
    27,65 EUR de envío
    De Reino Unido
    15 vendidos
  • Starrett DCH0334 Profundo Corte Bi-Metal Holesaw 95mm

    Starrett Part no: BF6195.
    31,13 EUR
    Vendedor excelente
    7,55 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett SM45 45mm TCT Carburo De Tungsteno De Acero Inoxidable Inox hoja Holesaw para

    Starrett tungsten carbide holesaws complete with arbor Product information Starrett Tungsten Carbide Tipped Stainless Steel Hole Saws are ideal for cutting high alloy & stainless steels, non ferrous light metals and reinforced fabrics. The tough tungsten carbide tipped teeth have a positive cutting angle which provides fast and efficient removal of chips and swarf Advantages of these TCT holesaws: Ideal for production cutting. Tungsten carbide tipped teeth provide superb product life and cutting performance. High cutting accuracy. Complete assembly - there is no requirement to purchase a separate arbor and pilot drill. Safety stop collar at the base of the hole saw Product images are of a different size and are for illustration only Maximum cutting depth 2mm.
    28,23 EUR
    Vendedor excelente
    27,65 EUR de envío
    De Reino Unido
    12 vendidos
  • Starrett MPH0338 TCT corte rápido Multi propósito Holesaw 86mm

    Starrett Part no: BF1635. The increased cutting depth allows for cutting through strapping and joists.
    31,84 EUR
    Vendedor excelente
    7,56 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett DCH0600 Profundo Corte Bi-Metal Holesaw 152mm

    Starrett Part no: BF6250.
    78,48 EUR
    Vendedor excelente
    8,51 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett DCH0238 Profundo Corte Bi-Metal Holesaw 60mm

    Starrett Part no: BF6130.
    24,08 EUR
    Vendedor excelente
    7,45 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett MPH0314 TCT corte rápido Multi propósito Holesaw 83mm

    Starrett Part no: BF1630. The increased cutting depth allows for cutting through strapping and joists.
    30,96 EUR
    Vendedor excelente
    7,55 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett MPH0412 TCT corte rápido Multi propósito Holesaw 114mm

    Starrett Part no: BF1685. The increased cutting depth allows for cutting through strapping and joists.
    56,47 EUR
    Vendedor excelente
    7,88 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett MPH0512 TCT corte rápido Multi propósito Holesaw 140mm

    Starrett Part no: BF1705. The increased cutting depth allows for cutting through strapping and joists.
    86,30 EUR
    Vendedor excelente
    8,62 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett DCH0512 Profundo Corte Bi-Metal Holesaw 140mm

    Starrett Part no: BF6245.
    69,45 EUR
    Vendedor excelente
    8,39 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett DCH0514 Profundo Corte Bi-metalholesaw 133mm

    Starrett Part no: BF6240.
    66,03 EUR
    Vendedor excelente
    8,34 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett MPH0196 TCT corte rápido Multi propósito Holesaw 40mm

    Starrett Part no: BF1555. Size: 40mm. The increased cutting depth allows for cutting through strapping and joists.
    24,00 EUR
    Vendedor excelente
    7,44 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett STRKFC 14021 KFC14021 Bi-Metal Holesaw Corte Rápido Universal Kit 1

    Bolt Croppers. Hand Impact Drivers. Top Rated Tools is a tool supplier based in North Yorkshire, and has been an online presence since 2003. Spark Plug & Ignition Tools. Bush & Suspension Tools. Belt & Pulley Tools ETC.
    146,54 EUR
    Vendedor excelente
    10,43 EUR de envío
    De Reino Unido
  • Starrett DCH0412 Profundo Corte Bi-Metal Holesaw 114mm

    Starrett Part no: BF6225.
    48,25 EUR
    Vendedor excelente
    7,78 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
  • Starrett MPH0458 TCT corte rápido Multi propósito Holesaw 118mm

    Starrett Part no: BF1690. The increased cutting depth allows for cutting through strapping and joists.
    59,09 EUR
    Vendedor excelente
    7,91 EUR de envío
    De Reino UnidoServicios aduaneros y de seguimiento internacional provistos
Dinos qué te parece - se abre una nueva ventana o pestaña